Wednesday, March 9, 2011

How To Pitch A Tent


Equipment
Pegs
Hammer
Poles
Fly (Outer tent)
Base
Interior
Inner tent


INSTRUCTIONS (Be aware that this may not be suitable for some types of tents)

During this process, make sure that you put spare pegs and poles in to the bag it came in.


1. First of all, you will need to unfold the base of the tent and lay it down. Ensure that the opening of the tent is facing the right way. Get a peg and place it through the eyelit. Hammer it in to the ground at a 45 degree angle AND so it is a bit hard to pull out. Repeat on every corner.

2. Once you have finished hammering the pegs, you will have to get the poles out and thread them through the inner tent. Once they reach the other side of the tent have a friend pull it out and put it in the second smaller eyelit. Repeat this process for the second pole.

3. Thirdly, you will need the fly (outer tent). Place it carefully on top of the inner tent. Make sure that the fly’s entrance matches the inner tents door.

4. You will find that there are little ropes attached to the fly. These are called GuyRopes. You will need more pegs for this. Hammer them down as you did the same with the four corners. But you don’t need to secure it as tightly.

5. Once you have finished that, you may lie down in your perfectly pitched tent.

Hopefully . . .

1 comment:

  1. That’s great Toreka!

    So the next time we go camping or to the beach I can leave that for you to do?

    ReplyDelete